Default Values - ABB Eib Delta Zähler Dz+ Montage- Und Bedienungsanleitung

Default Values

The table below lists the default values, check if any of them needs to be
changed. If so, see section Settings.
Parameter
VT ratio (Ut)
Transformer-rated only
CT ratio (Ct)
Transformer-rated only
Pulse frequency (P)
[imp/kWh]
Address (Adr)*
Baud rate (Bd)*
M-Bus only
* not used for EIB / KNX Delta Meters
Direct connected
meters
-
-
100
0
2400
45
Value
Transformer-rated
meters
1
1
10