Standard Accessories - Hitachi CL 10D Bedienungsanleitung

13. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
14. Never disassemble the rechargeable battery and
charger.
15. Never short-circuit the rechargeable battery. Short-
circuiting the battery will cause a great electric
current and overheat. It results in burn or damage
to the battery.
16. Do not dispose of the battery in fire.
If the battery is burnt, it may explode.
17. When drilling in wall, floor or ceiling, check for
buried electric power cord, etc.
SPECIFICATIONS
POWER TOOL
Model
No-load speed
Capacity: Soft steel studs
(Size of screws for cutting)
Rechargeable battery (EB9)
Weight
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

3
1 Charger (UC14YF or UC14YF2) .............................. 1
2 Plastic case ................................................................ 1
3 Hexagon bar wrench ............................................... 1
4 Cutter .......................................................................... 2
5 Trimmer ...................................................................... 1
The proper screw size for the accessory cutter 4 and
trimmer 5 are displayed on the packing box.
Standard accessories are subject to change without notice.
1
4
18. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery
life becomes too short for practical use. Do not
dispose of the exhausted battery.
19. Using an exhausted battery will damage the
charger.
20. Do not insert object into the air ventilation slots
of the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
CL10D
0 – 28/min
M10 × 1.5 M8 × 1.25
M3/8" × 1.5875
Ni-Cd battery, 9.6 V
3.4 kg
UC14YF / UC14YF2
7.2 – 14.4 V
1.3 kg
OPTIONAL ACCESSORIES (sold separately)
1. Battery (EB9, EB9B)
2
5
English
M6 × 1
2