Würth EWS 8-115 LIGHT Betriebsanleitung Seite 18

The safety hood must be securely
c)
for maximum security so that only the
smallest possible part of the grinding
wheel is open and facing towards the
operator.
Grinding wheels may only be used for
d)
the recommended applications.
Always use undamaged clamping
e)
the grinding wheel used.
Do not use worn grinding wheels from
f)
larger electric tools.
Further special safety precautions for
cut-off wheels:
a)
excessive contact pressure.
Avoid the area in front of and behind
b)
recoil.
c)
hold it steady until the wheel has come
to a standstill.
18
Special safety instructions
Do not switch on the electric tool again
d)
as long as it is in the workpiece. Allow
a recoil.
Support plates or large workpieces to
e)
reduce the risk of a recoil caused by the
Be particularly careful when cutting
f)
"pockets" in existing walls or other
surfaces that you cannot see behind.
Special safety precautions during
sanding:
a)
-
Special safety precautions when
working with wire brushes:
Note that wire brushes lose pieces of
a)
wire even during normal operation. Do
-
If a safety hood is recommended, take
b)
care that the wire brush does not come
- into contact with the safety hood. Disc