Safety Instructions - Denon Professional DN-700CB Benutzerhandbuch

Safety Instructions

Please also see the included Safety & Warranty Manual for more information.
Before turning the power
on:
Proper ventilation:
About condensation:
Cautions on using
mobile phones:
Moving the unit:
About care:
Rackmount warnings:
(required rack specifications
for mounting the unit in a
rack)
Rack installation:
4
Make sure all connections are secure and correct and that there are no
problems with the connection cables.
Power is supplied to some of the circuitry even when the unit is powered
off. When the unit will not be used for long periods of time, disconnect the
power cable from the power outlet.
If the unit is left in a room which is not properly ventilated or is full of dust,
smoke from cigarettes, etc. for long periods of time, the surface of the
optical pickup may get dirty, causing incorrect operation.
If there is a major difference in temperature between the inside of the unit
and the surroundings, condensation may form inside the unit, causing the
unit not to operate properly. If this happens, let the unit sit for an hour or
two while powered off, and wait until there is little difference in temperature
before using the unit.
Using a mobile phone near this unit may cause noise. If this occurs, move
the mobile phone away from this unit when it is in use.
Before moving the unit, turn off its power and disconnect the power cable
from the power outlet. Next, disconnect its connection cables from other
devices before moving it.
Wipe the cabinet and control panel clean with a soft cloth.
Follow the instructions when using a chemical cleaner.
Do not use benzene, paint thinner, insecticide, or other organic solvents to
clean the unit. These materials can cause material changes and
discoloration.
EIA standard 19-inch (48.3cm) rack
1U-size installation compatible rack
Rack that has a guide rail or shelf board that can support this device
This product will work normally when the player
unit is mounted within 10° off the vertical plane at
the front panel. If the unit is tilted excessively, the
disc may not load or unload properly. (See image.)
Maximum
10°
Unit