LIVARNOLUX HG03444B Bedienungs- Und Sicherheitshinweise Seite 10

power drill in the manual for
the power drill. Death or injury
due to electric shock may
otherwise result.
When selecting the mounting loca-
tion, pay attention to the following:
Make sure that the spotlight
illuminates the desired area.
You can move the spotlight
vertically.
Make sure the motion detector
covers the desired area.
9
The motion detector
maximum coverage range of
12 m, with a coverage angle
of about 180° (depending on
the mounting height – a height
of 2.50 m is ideal) (Fig. D).
Make sure the motion detector
is not illuminated at night
9
by street lighting. This can influ-
ence its functioning.
During mounting, proceed as
described below:
Unscrew locking screw
using a screw driver (cross
type) to detach the mounting
stirrup from the spotlight
4
10 GB/IE/NI
1
1
has a
9
by
5
.
1
Hold the mounting stirrup
so that it is horizontal (possibly
with a spirit level) against the
wall and mark the fastening
holes.
Now drill the fastening holes
(Ø 6 mm) and push the wall
plugs into the drill holes (Fig. A).
Secure the mounting stirrup
onto the wall using the screws
provided.
N ow use the screw driver (cross
type) to attach the spotlight
to the mounting stirrup
using the previously removed
locking screw , spring washer
5
, and metal nut
2
Open the connection box
after you have released the lid
of the connection box
a cross type screwdriver.
Insert the connection cable (not
include in the product), type
H05RN-F 3G 1.0 mm
the cable gland
the connection box
length for the connection cable
line should not exceed 2.5 m.
Fix the connection cable with
the cable clamp
4
4
1
by
4
(Fig A).
3
6
with
6
, through
2
and into
7
. The
6
first and
14