Network Detection Tab; Network Stat. Tab - Abus TVVR33008 Bedienungsanleitung

Network Detection tab

Under "Network Delay, Packet Loss Test", you can check
the connection to another device, such as a computer
('pinging'). Enter the network address of the device to be
checked (e.g. 192.168.0.25) and click on Test.
Information on two parameters will appear:
Parameter Setting
Average The time the pinged device needs to
delay reply.
Packet loss Displays the percentage of packets
rate: that were not transmitted.
Note
If the packet loss rate is high, we recommend that
the "Network Delay, Packet Loss Test" is
repeated.
Note
If the packet loss rate is still high, you should
check that the network cables are correct and not
damaged.
The higher the packet loss rate, the poorer the
connection between the pinged device and the
recorder.
Under "Network Packet Export", the settings of the
individual connections can be exported according to the
setting of the connection.
1. For "Device Name", select a storage medium to save
the settings to.
2. Click on Export.
After the progress display finishes and initialisation is
successful, an information window will appear. Close
it by clicking on OK.
Click on Status to display the status of the LAN
connections (connected/not connected).

Click on Net Detect to change your network settings.
120
Note
This view allows for the analysis of network and
performance problems with the recorder.

Network Stat. tab

The bandwidth used by the device is displayed under this
tab.
You can refresh the data by clicking on Refresh.
Maintenance