Signs And Symbols; Product Information; Manufacturer´s Data; Device Identification - Mafell S 50 Originalbetriebsanleitung

1

Signs and symbols

2

Product information

for dust extractors S 50 with item No. 915905, 915940, 915941 or 915942
for dust extractors S 25 with item No. 915915, 915950, 915951, 915952, 915955 or 915959
2.1 Manufacturer´s data
MAFELL AG, Postfach 1180, D-78720 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49 (0)7423/812-
218

2.2 Device identification

All information required for device identification is available on the rating plate attached to the motor casing.
This symbol appears at places where you will find instructions for your
own safety.
Non-compliance with these instructions may result in very serious injuries.
This symbol indicates a potentially hazardous situation.
If this situation is not avoided, the product or objects in its vicinity may get
damaged.
This symbol indicates tips for the user and other useful information.
CE symbol to document compliance with the basic safety and health
requirements according to Appendix I of the Machinery Directive.
For EU countries only
Do not dispose of electrical tools together with domestic waste!
In accordance with the European directive 2002/96/EC on waste electrical and
electronic equipment and transposition into national law, obsolete electrical
tools must be collected separately and recycled in an environmentally-
compatible manner.
To reduce the risk of injury, please read the operating instructions.
-15-