Herunterladen Inhalt Inhalt Diese Seite drucken

Sleep Function; Factory Reset; Specification - Denver DAB-23 Bedienungsanleitung

Fm/dab digital radio
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
Ensemble / Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a single
frequency. There are national and local multiplexes, local ones contain stations that are specific to that area.
On some occasions you will see a ">" symbol appeared after the name of the station, this indicates that
there are secondary services available to that station. These secondary services contain extra services
that relate to the primary station.
DLS
DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include
in their transmissions. The message usually includes information such as programme details ...etc.

SLEEP FUNCTION

This function allows you to program the radio to switch off itself after a set period of time. You can set your
sleep time in either standby or power on mode; if the sleep time is set in standby, the radio will go to on
automatically after the setting is confirmed.
1. To activate the sleep function, press the SLEEP button, the display will show "SLEEP 90 mins".
2. Repeatedly press the SLEEP button, the time will change in the below sequence on every press:
3. When the display shows your desired sleep time, release the button, the sleep time will be confirmed
in 2 seconds. The display will show "SLEEP Confirmed" and 'SLP' will be then displayed to indicate that
the sleep time is set.

FACTORY RESET

When you move the radio to another part of the country, your pre-tuned DAB stations may no
longer be available and you might need to reset your radio back to its original factory settings; to
perform factory reset, please do the following:
1. Unplug the unit from mains.
2. Depress and hold the SELECT button when re-connecting the unit to mains again.
3. Release the button until "System reset" displayed on the LCD.
4. The unit will perform "Autotune Full scan".
5. After the searching (around 1 minute depends on the no. of stations), press the SELECT button
together with the SELECT UP & DOWN buttons for stations.
NOTE: All of your stored DAB & FM presets will be lost once the reset has taken place.

SPECIFICATION

POWER SUPPLY :
OUTPUT POWER :
FREQUENCY RANGE :
UNIT DIMENSION :
WEIGHT:
SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.
Dripping warning :
" The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the product."
Ventilation warning :
" The normal ventilation of the product shall not be impeded for intended use."
AC
230V~50Hz
1 Watts x 2
DAB 174-240 MHz
FM
87.5- 108 Mhz
256 (W) x 78 (D) x 120 (H) mm
1.81kg
UK - 6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis