Function Buttons; Mode Button; Reset Button; On/Off Button - INVENTOR MGHP-12 Benutzer's Betriebshandbuch

Function buttons

SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
TEMP
1
ON/OFF
MODE
FAN SPEED
3
SWING TIMER ON
ECONOMY
4
TIMER OFF
RESET LOCK
5
LED
DISPLAY
Model: RG51B14/(C)E,RG51B16/(C)E,
RG51B18/(C)E,RG51B19/(C)E-M,
RG51B20/(C)E,RG51B31/(C)E
RG51B30/(C)E,RG51B32/(C)E
NOTE:
RG51B16/(C)E ,RG51B18/(C)E
models have no SWING feature;
RG51B18/(C)E ,RG51B19/(C)E-M,
RG51B20/(C)E models have no
LED DISPLAY feature.
RG51B19/(C)E-M model has no
MED FAN feature.
RG51B31/(C)E model ECONOMY button
is instead of SLEEP button.
RG51B30/(C)E model has no
MED FAN and SWING features.
RG51B32/(C)E model has no MED FAN,
SWING and ECONOMY features.
SET TEMPERATURE( C)
AUTO FAN
COOL HIGH
DRY MED
HEAT LOW
TEMP
1
ON/OFF
MODE
FAN SPEED
3
TIMER ON
SWING ECONOMY
4
TIMER OFF
ION
RESET LOCK
14
LED
FOLLOW
5
DISPLAY
ME
13
Model: RG51B 25/(C)E;RG51B27 /(C)E
RG 51B30/(C)EF
NOTE:
RG51B25/(C)E model has no SWING
and FOLLOW ME features.
RG51B27/(C)E model has no FOLLOW ME
feature.
RG51B30/(C)EF model has no SWING and
ION features,ECONOMY button is instead
of SLEEP button
TEMP DOWN Button
1
Push this button to decrease the indoor temper-
ature setting in 1 C(2 F) increments to 30 C(88 F).
FAN
HIGH
MED
TEMP UP Button
LOW 2
Push this button to increase the indoor temper-
2
ature setting in 1 C(2 F) increments to 17 C(62 F).
6
7
3

MODE Button

8
Each time the button is pressed, the operation
9
mode is selected in the sequence of the following:
10
AUTO
11
12
NOTE: Do not select HEAT mode if the machine you
purchased is cooling only type. Heat mode is not
supported by the cooling only appliance.
4
5

RESET Button

Once the recessed RESET button is pressed,
all of the current settings will be cancelled
and the controller will return to the initial settings.
6
7
8
TIMER ON Button
2 Press this button to activate the Auto-on time
6
setting. Each press will increase the time setting
7
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
8
Auto-on time setting, just press the button until
9
10 the time setting is 0.0.
11
9
ECONOMY(SLEEP) Button
12
Select this function during the sleeping time. It
can maintain the most comfortable temperature
and save energy. This function is available on
COOL, HEAT or AUTO mode only .
o
o
COOL
SWING Button(on some models)
Used to stop or start louver movement and
set the desired up/down airflow direction.

ON/OFF Button

Operation starts when this button is pressed
and stops when the button is pressed again.
FAN SPEED Button
Used to select the fan speed in four steps:
Auto Low Med
Some models have no MED FAN feature.
4
o
DRY HEAT
High
o
FAN