Caution:
•
Not to be used at a gradient above 180%!
•
In displayed examples, the friction coefficient is not included. Mind that any loads without wheels require
more power from the rope winch.
•
On slopes, the load should be secured against slipping
Procedure
Hand operated winding pulley may be used for drawing loads only. The total weight of the load should not be in excess
of data on the plate.
Wires and additional ropes may get broken and cause severe injuries by backlash!
Operation
Rope slackening:
Push the stretching spring (Fig.5) to the slackening position (up), thus releasing the interlock (Fig. 4).
Rope may be unwound if the detention lever (Fig. 2) is held in the release position .
(gradient)
11