Auto program 1
Auto program 2
Auto program 3
Backlight Setting
System
Display
3.3 Connections:
1
2
3
Auto
Keep On
Normal
Turnover
4
5
6
Automatic programs.
a) Press the ► button (Enter) until "Run Mode" is displayed.
b) To select the desired program, press the ▲ (Up) or ▼
(Down) buttons.
c) To confirm and exit the menu press the key ► (Enter) or "OK"
d) Press the ◄ (Return) key to exit the selection without saving.
Display illumination (Display turns dark after 15 seconds
without keystroke or is always on)
a) Press the ► button (Enter) until the display shows "Settings".
b) Press the ▲ (Up) or ▼ (Down) buttons until "On" or "Off" is
displayed.
c) To confirm and exit the menu press the key ► (Enter) or "OK"
d) Press the ◄ (Return) key to exit the selection without saving.
Reverse display (eg in flight mode).
a) Press the ► button (Enter) until "Display" is displayed.
b) To select the desired mode, press the ▲ (Up) or ▼ (Down)
buttons.
c) To confirm and exit the menu press the key ► (Enter) or "OK"
d) Press the ◄ (Return) key to exit the selection without saving.
28