Vision SB-900P Bedienungsanleitung Seite 8

BLUETOOTH INPUT
The first time you connect you will need to pair your device. For this example we will pair a
phone.
1. PRESS SOURCE TO ACTIVATE BT INPUT Blue Indicator will start flashing
2. ON PHONE GO INTO SETTINGS/BLUEOOTH You will see the SB-900P listed. If not it may
already be paired to another device (Blue indicator will have stopped flashing). Press and
hold PAIR button until blue indicator starts flashing.
3. ENTER PASSWORD
solidly.
Notes:
The operational range is approximately 8 metres (26 feet)
•
• If signal strength is weak and connection is lost, the soundbar will revert to pairing
mode.
• This product uses Bluetooth version 4.2. It is not guaranteed to work with all source
devices.
This product can only pair with one source at a time.
•
If no source device is paired within 2 minutes will revert to the previous source.
•
0000 (zero four times). When it pairs the blue indicator will light up
8
SB-900P_manual_en.doc