Additional Menu Operations; Using The Aci Function; Program Menu; Downloading Data To A Vcr - JVC PD-42V31BJE Serviceanleitung

Additional menu operations

Using the ACI function

This TV has an ACI function which decodes the ACI
(Automatic Channel Installation) data.
Using the ACI function allows all TV channels transmitted
from the cable TV station to be properly registered quickly
according to the data from the cable TV station.
Caution
• If your cable TV station broadcasts ACI data and if
"ACI START/ACI SKIP" appears in the AUTO
PROGRAM menu, the ACI function is enabled. In all
other cases, it is disabled.
1 Press the 6 6 buttons to choose ACI START.
6 6
Then press the a a button to start the ACI
a a
function
When you don't want to use the ACI function:
Press the 6 buttons to choose ACI SKIP and then
press the a button.
If the AUTO PROGRAM menu changes to
another menu:
Depending on your cable TV station, there may be a
broadcast selection menu set up by the cable TV station.
Follow the menu and use the 5 and 6 buttons.
After you have made the setting, press the a button.
If "ACI ERROR" is displayed in the AUTO

PROGRAM menu:

"ACI ERROR" means that the ACI function is not
working properly. Press the a button to start the ACI
function again.
If "ACI ERROR" still appears even after you have tried
to start the ACI function several times, press the 3
button to start the AUTO PROGRAM function. It does
not cause any problem because all the TV channels are
registered to the Programme numbers (PR) by the
AUTO PROGRAM function.
2 When the settings are completed, the EDIT
menu is displayed. Return to the instructions
that you were reading before, and continue the
operation
When the "Initial settings" have been made:
Return to step 6 of "Initial settings" on page 11.
When the "AUTO PROGRAM" has finished:
Return to step 4 of "AUTO PROGRAM" on page 31.
• If you have any questions about the items in the
Broadcast Selection menu or how to operate the
menu, please contact your cable TV station.
• When the cable TV broadcast reception is poor, the
ACI function will not work properly.
• If there is an error in the ACI data itself, the TV
channel cannot be registered properly. If this
happens, turn the ACI function off (ACI SKIP) and
use the AUTO PROGRAM function. Or, use the
EDIT/MANUAL function to correct the programme
number (PR) setting.

Downloading data to a VCR

You can send the latest programme numbers (PR) data to a
VCR with the T-V LINK function.
• You can only do this when a T-V LINK compatible VCR
is connected to the EXT-2 terminal.
• This only works when the T-V LINK menu is being
displayed.
T-V LINK
DOWNLOAD TV VCR
BACK
TV OK
EXIT
D0005-EN
1 Turn on the VCR
2 Press the a a button
a a
The data transmission begins.
DOWNLOAD TV VCR
TRANSFER. . . . .
D0037-EN
The T-V LINK menu disappears once the data
transmission ends.
When the T-V LINK menu changes over to
another menu:
The TV has finished its menu. This new menu is
operated from the VCR. See the VCR instruction manual
for what to do next.
If "FEATURE NOT AVAILABLE" appears at the T-V
LINK menu, check the following three items.
• Has a T-V LINK compatible VCR been connected to
the EXT-2 terminal?
• Has the VCR power been turned on?
• Does the SCART cable that connects the EXT-2
terminal to the T-V LINK compatible VCR have all
its proper connections?
Then press the a button to retry data transmission.
35