Cleaning And Storage; Troubleshooting - Rotel U4473CH Gebrauchsanweisung

• CLEANING AND STORAGE
o Always unplug the appliance before cleaning.
o Clean the parts that had direct food contact in hot water with mild detergent imme-
diately after use dry them thoroughly.
o Always keep the contact pins at the bottom of the bowl clean and dry. Only wipe the
contact pins with a wet cloth!
o Clean the base of the appliance with a damp soft cloth. Do not immerse the motor
base in water and do not rinse it either.
o Do not use anything harsh or abrasive cleaners or tools that may scratch or damage
the surfaces of the appliance or its accessories.
o If the bowl is hard to clean, pour some hot soapy water into the bowl and run the
appliance at speed 1 for few minutes.
o Store the appliance in a dry place, out of the reach of children and preferably in its
original box.

• TROUBLESHOOTING

Code Explanation
The stainless-steel bowl isn't
E01
properly installed
E02 The bowl cover is missing
The head isn't properly
E03
locked into position
The temperature of the mo-
E04
tor is too high.
o Switch the appliance to the standby mode and ensure correct assembly before re-
suming operation.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
Remarks
The appliance doesn't work and a sound signal
indicates the error (either in heating or heating
& stirring mode)
The appliance doesn't work and a sound signal
indicates the error (either in heating or heating
& stirring mode)
The appliance doesn't work and a sound signal
indicates the error
The appliance doesn't work and sound "Beep"
was heard. When the motor temperature is
lower, the appliance can start to work.
64