Cleaning And Maintenance; Technical Specifications - HQ Power HQAA1000x Bedienungsanleitung

6.

Cleaning and Maintenance


Before any maintenance you must switch off and unplug the device. Let it cool down.

Clean with a moist cloth. Do not clean with water or submerse in water or any other liquid.

Never use solvents like gasoline, isoamyl, acetate, toluene, etc.
7.

Technical Specifications

RMS power
4 Ω (stereo)
8 Ω (stereo)
8 Ω (bridge)
frequency
response
input sensitivity
max. input level
input impedance
S/N ratio
crosstalk @ rated
output power
damping factor
internal slew rate
weight
dimensions
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 19/09/2016
HQAA10001
SAGIRA 100
2 x 100 W
2 x 60 W
180 W
> 90 dB
40 V/µs
7.8 kg
HQAA1000x
HQAA10002
SAGIRA 150
2 x 150 W
2 x 100 W
300 W
10 Hz to 50 kHz, 1.5 dB
0.77 V/26 dB/1.4 V
21 dB/9 V
20 kHz
> 90 dB
> 70 dB
> 350
8.8 kg
482 x 314 x 88 mm
6
HQAA10003
SAGIRA 200
2 x 300 W
2 x 200 W
600 W
> 93 dB
45 V/µs
9.3 kg
HQAA10004
SAGIRA 450
2 x 450 W
2 x 300 W
900 W
> 96 dB
10.2 kg
©Velleman nv