Dmx-Controlled Operation - EuroLite LED BC-6 Bedienungsanleitung

Setting Solid Colors and Brightness
Press the MODE button to select the solid color and brightness mode. When the Control Board shows r001,
you can select the desired brightness of the red LEDs via the UP or DOWN buttons (from 00 to 31 with
increasing brightness).
Additionally, by pressing the ENTER button you can set the speed of the step motor (Strobe effect).
Please press the MODE button to attain the main menu.
You can now set the desired brightness of the green and blue LEDs, as well as the speed of the step motor,
in the same manner.
Auto Mode
Press the MODE button to select the Auto mode. When the Control Board shows A011, you can select the
desired internal program via the UP or DOWN buttons (see following graphic).
By pressing the ENTER button you can set the speed of the step motor.
Please press the MODE button to attain the main menu.
Program:
01 RR, Strobe
02 GY, Strobe
03 BW, Strobe
04 RRGY, Strobe
05 RRBW, Strobe
06 GYBW, Strobe
07 RRGYBW, Strobe
08 R-R-G-Y-B-W, color change
09 RRGY-RRBW-GYBW, color change
10 7 color change
11 7 color fade
12 Endless loop of programs 1 - 11
Sound Control Mode
Press the MODE button to select sound control mode. When the Control Board shows S011, you can select
the desired internal program via the UP or DOWN buttons (see following graphic).
By pressing the ENTER button you can set the speed of the step motor.
Please press the MODE button to attain the main menu.
Program:
01 RR, Strobe
02 GY, Strobe
03 BW, Strobe
04 RRGY, Strobe
05 RRBW, Strobe
06 GYBW, Strobe
07 RRGYBW, Strobe
08 R-R-G-Y-B-W, color change
09 RRGY-RRBW-GYBW, color change
10 7 color change
11 7 color fade
12 Endless loop of programs 1 - 11
Slave Mode
Press the MODE button to select sound control mode. When the Control Board shows SLAv then the LED
BC-6 Beam Effect is in Slave mode and can be controlled by a Master LED BC-6 Beam Effect device
Now set the Master device to one of the stand-alone modes (Auto or Sound Control).

DMX-controlled operation

You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. Individual DMX channels and their features are listed under DMX
Protocol.
Function:
Function:
22/24 00077416.DOC, Version 1.0