Leckey KIT Bedienungsanleitung Seite 34

8.12 Headrest
To adjust the height of the headrest, loosen
the screw (A) at the top of the backrest spine.
Position the headrest to the required
height to suit the user's head position.
Retighten the screw.
To position the headrest, loosen one or both
of the plastic handles (B) at the hinges of the
headrest mounting. Position the headrest as
required. Retighten the screws.
To angle or rotate the head support, loosen
screws (C), set to required position and
retighten securely.
To change the profile of the Profiling
Contoured Headrest, remove the cover,
loosen the screws (D), set to the required
position and retighten screws. Fit the
cover again.
B
A
C
D
8.13 Seat Base Depth
To adjust the seat base depth, loosen the nuts
(A) underneath the upper leg supports with a
spanner. Move the upper leg support in or out
to the required position and retighten the nuts
securely. It is possible to upgrade the Size 1
seat base to achieve the same seat depth size
as the Size 2 seat.
A
A