Shark EvoLine series3 Bedienungsanleitung Seite 20

20
VIsor
rEPLaCEmEnT
- Both of the visor supports must be in the high
position;
- Position the visor, starting with the upper fixing lug
(Fig. A);
- Rotate the visor on its supports until a "click" is
heard, blocking it on both side; your visor is then in
place: before you use it, check that it is properly in
place and functioning perfectly.
warnInG! If you are not sure that you
properly replaced the visor, do not use
the helmet. The visor could suddenly and wit-
hout warning become detached from the hel-
met while riding, causing you to lose control
of your motorcycle, resulting in an accident,
personal injury, or death. Contact your retailer
for any assistance or advice.
while riding at highway speeds, do not ride
with an open visor and do not try to open
the visor. The visor could become dislodged,
leaving your eyes and face unprotected. In
addition, your head could be pulled to the side.
These events could cause you to lose control
of your motorcycle, resulting in an accident,
personal injury or death.
warnInG! Tinted or dark visors should
never be used at night or under poor
visibility conditions as they reduce your ability
to see. never ride with a fogged visor.
warnInG! If your visor no longer pro-
vides you with clear visibility after
a period of service, you must immediately
replace it. never ride with your vision obscured
in any way. always ride with perfect visibility.
erManualEvoCarbon.indd 20
a
B
clic!
24/07/14 16
ThE
The
wit
wa
gla
you
nel
ty,
is r
the
The
upp
Wh
forw
the
To
ext
giv
it, p
nal
wa
pro
of
rep
per
pro
alw
vio