Balluff BFF T-003-A2A-S4 Serie Betriebsanleitung Seite 9

Inline flow controller with LEDs
BFF T_ _ _ _-_ _003-_ _ _A2A-S4
Validity
This manual applies to the inline flow controller with LEDs
BFF T_ _ _ _-_ _003-_ _ _A2A-S4.
Fig. 1: Product illustration
Intended use
The flow controller is used together with the integrated
processing electronics to monitor the flow rate and is
intended for installation in an industrial pipe line.
The flow controller is designed only for the purpose
described here and may only be used accordingly.
The technical specifications in this guide must be adhered to.
Improper handling or operation of the flow controller
beyond the technical specifications will make immediate
stoppage and an inspection by an authorized Balluff
service technician necessary.
Modifications to the flow controller or non-approved use
are not permitted and will result in the loss of warranty and
liability claims against the manufacturer.
Non-intended use
The flow controller may not be used in areas where
functional safety (SIL) is required or where malfunctions
can result in hazards to persons and equipment.
The flow controller may not be installed in explosion hazard
areas. Outgoing cables may not be routed in explosion
hazard areas.
The flow controller is a standard component and not a
safety device per MRL 2006/42/EG. For safety
applications a detailed assessment of the applicability of
the sensor per EN ISO 13849 or another applicable
standard by the system designer is required.
www.balluff.com
Downloading further instructions
This guide can also be downloaded from the Internet at
www.balluff.com.
Scope of delivery
– Flow controller
– Screwdriver
– 4 x gasket made of AFM34
– This guide
Notes to the user
The device described in the guide has been designed and
manufactured according to the state-of-the-art.
All the components were subjected to strict quality and
environmental criteria during manufacture. Our
management systems are ISO 9001 certified.
This guide provides important information about use of the
device. Safe operation requires maintaining of all indicated
safety notes and handling instructions.
The local prevailing accident prevention regulations and
general safety codes must be maintained for the range of
application of the device.
The guide is a product component and must be kept near
the device where it can always be accessed by technical
personnel.
Technical personal must have carefully read and
understood the guide before beginning any work.
Function
The flow controller consists of a calorimetric measuring
system and processing circuitry.
The device evaluates the flow rate-dependent signal from
the measuring system and detects under- or overshoot of
the user set limit value for the flow rate.
The switching output (NO) is active when the flow /
medium temperature has reached or exceeded the limit.
english 1