7. Mounting the device
The device is designed to be mounted on the underside of a wall cupboard or shelf
unit. You will need the four supplied screws to mount the device.
Select a space close to a mains power socket.
Remove the bracket from the device by pulling it to the rear.
Use the bracket to mark the drill holes.
Check that the position is correct using the device.
Drill four holes where you made your markings on the underside of the shelf
unit in order to fix the screws.
Screw the mounting bracket to the bottom of the cupboard or shelf.
Now place the device onto the mounting bracket retaining pins and carefully
push it back until it stops.
WARNING!
Risk of fire/short circuit!
Rising steam or heat can pose a risk of electric shock or
fire if a short circuit occurs.
Never mount the device above a hob or any other
heat or steam source (for example, electric kettles,
etc.).
Never allow the mains cable to hang over a cooker
hob or other heat source.
162
INFO/MENU