• Press [EXIT] in order to return to the main menu.
- Wheel adjustment
With this function, you can calibrate and adjust the effect wheels to their correct positions.
• Select "WHEL" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows"CODE".
• Press [MODE/ENTER], the display shows"CXXX".
• Enter the password "C050" by pressing [UP] or [DN].
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
• Press [MODE/ENTER], the display shows"CH-XX", "X" stands for the channel number.
• Select the desired channel by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows"XXXX", "X" stands for the calibration value.
• Adjust the desired calibration value between –128 and 127 by pressing [UP] or [DN].
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Main menu 4
• Press [MODE/ENTER] to enter the main menu (display flashing).
• Press [UP] or [DN] to select "TIME".
- Fixture running time
With this function you can display the running time of the device.
• Select "MATI" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows"XXXX", "X" stands for the number of hours.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Lamp running time
With this function you can display the running time of the lamp.
• Select "LATI" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows"XXXX", "X" stands for the number of hours.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Clear lamp time
• With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp.
• Select "CLLT" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows "ON" or "OFF".
• Press [UP] or [DN] to select "ON" if you wish to enable this function or "OFF" if you don't.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Main menu 5
• Press [MODE/ENTER] to enter the main menu (display flashing).
• Press [UP] to select "EDIT".
49/103
00026590.DOC, Version 1.1