Safety Instructions - LR-Cal LSP 1000-BM Betriebsanleitung

Comparison Test Pump
LSP 1000-BM and LSP 1600-BM

1.2 Safety instructions

Read these operating instructions carefully prior to operating
the comparison test pumps LSP 1000-BM and LSP 1600-BM. Its trouble-free
operation and reliability cannot be guaranteed unless the safety advise given in
this manual is followed when using the device.
1. The system must only be operated by trained and authorised personnel who know the manual and
can work according to them.
2. Trouble-free operation and reliability of the device can only be guaranteed so long as the
conditions stated under "Setting up the device" are taken into consideration.
3. The LSP 1000-BM or LSP 1600-BM always has to be handled with the care required for an precision
instrument (protect from humidity, impacts and extreme temperatures). The device must be
handled with care (don't throw, hit, etc.) and protect them from contamination. By no means apply
any force to the operating elements of the pumps.
4. If the device is moved from a cold to a warm environment, you should therefore ensure the device
temperature has adjusted to the ambient temperature before trying to put it into operation.
5. If the equipment is damaged and might no longer operate safely, then it should be taken out of use
and securely marked in such a way so that isn't used again.
Operator safety may be at risk if:
There is visible damage to the device
The device is not working as specified
The device has been stored under unsuitable conditions for an extended period of time.
If there is any doubt, please return the device to the manufacturer for repair or maintenance.
6. Customers must not attempt to alter or repair the device themselves. If the instrument is opened or
attachment parts or the tubing are released, its trouble-free operation and reliability is impaired and
endangers the operator. Please return the device to the manufacturer for any repair or
maintenance.
7. There must be used only the original sealings in the device.
8. Any operation not included in the following instructions or outside the specifications must not be
attempted.
Operating Instructions Comparison Test Pump Version 1.0
GB
.
5