Maintenance; Cleaning; Error Messages - bürkert 8311 Bedienungsanleitung

6

MaiNTENaNCE

type of message description
ERR 0 Calibration data is lost
Reading error: the process is
stopped
ERR 1 Calibration data cannot be saved
Write error: the process is stop-
ped
ERR 2 The calibration parameters cannot
be accessed
Menu reading error: the process
goes on operating

6.1 Cleaning

The controller 8311 can be cleaned with water or any solution compatible
with the materials the device is made of
For more information, please contact your Bürkert sales office

6.2 Error messages

to do
Press the ENTER key to go back to the Normal mode
The device has returned to its default configuration: the device
must be calibrated again
If the message appears frequently, send the device back to your
Bürkert sales office
Press the ENTER key to go back to the Normal mode
The device displays the configured data; BUT this data has not
been saved: the device must be calibrated again
If the message appears frequently, send the device back to your
Bürkert sales office
Press the UP and DOWN keys under the display to scroll through
the menus
If the message appears frequently, send the device back to your
Bürkert sales office
Pressure controller 8311