3.2. Ensure that the mains supply is accessible
Even when the device is switched off, some compo-
nents are still live
To disconnect the power to your device or to complete-
ly isolate the device from voltage sources, disconnect
the device from the power supply completely.
Only connect the device to an easily accessible mains sock-
et that is close to the place where you have set up the device.
The mains socket must be easily accessible so you can un-
plug the device from the mains quickly if necessary. The local
mains voltage must correspond to the technical specifications
for the device.
Make sure that the power cord does not present a trip hazard.
Do not allow the power cord to become trapped or squashed.
3.3. Damage
DANGER!
There is a risk of electric shock.
Never, under any circumstances, attempt to open and/
or repair the device yourself.
Do not use if the device or the power cord is visibly damaged
or if the device has been dropped.
If the device or power cord is damaged, remove the plug from
the mains socket immediately.
If the power cord of this device is damaged, it must be re-
placed by the manufacturer (or relevant customer service) or
other suitably qualified person. This is to avoid hazards.
In the event of a fault, contact our Service Centre or another
suitable professional repair workshop to prevent hazards.
DE
EN
FR
ES
IT
NL
35