Carel pCO5 Betriebsanleitung Seite 39

• pressing  once again displays the following sequence of screens:
• once again pressing  moves the cursor from one fi eld to the next, and  change the value of the current fi eld.
The fi eld P:xx shows the address of the selected board; in the example in the fi gure, 12 has been selected;
• to exit the confi guration procedure and save the data, select the fi eld "OK ?", set Yes and confi rm by pressing .
The fi elds in the "Adr" column represent the addresses of the terminals associated with the pCO
Priv/Shared column indicates the type of terminal.
Important: the pGD terminals cannot be confi gured as "Sp" (shared printer) as they have no printer output. If the terminal remains
inactive (no button pressed) for more than 30 seconds, it automatically exits the confi guration procedure without saving any
changes.
USB PORT OPERATION
On specifi c models, pCO 5 is supplied with two diff erent USB ports (host and slave), to be used during installation and diagnostics.
The host port is used to connect USB data storage peripherals (pen drives, portable hard disks, etc.) and then perform a series of
operations:
1. upload fi les present on the removable peripheral to the pCO
for logs, Bios.
2. download fi les from the pCO
To access the menu used to manage the contents of the removable peripheral connected to the host port, simply hold
ALARM+ENTER for a few seconds, until the fi rst Bios system screen is shown. Selecting the FLASH/USB MEMORY item and then USB
PEN DRIVE accesses the main menu used to choose the operation, upload or download. When selecting UPLOAD, a further option
is shown to specify manual access the contents of the pen drive (browsing the directories and fi les) or automatic access (direct
access to the confi guration fi les). In addition, if the peripheral connected contains a fi le called AUTORUN.TXT that is compliant with
the corresponding specifi cations, the terminal will automatically show a screen for the direct activation of the specifi c function this
refers to. For details on creating such fi les, see the manual code +0300009ML.
The DOWNLOAD option is used to download the application, the logs, the parameters and the Bios. Note that during the upload
and download procedures through the host port, operation of the pCO
The USB slave port can be connected directly to a PC, without needing additional devices. To use this function, the pCO Manager
software is required.
The following operations are available through this port:
1. upload fi les to the pCO
1. download data to the PC from the pCO
2. manage the NAND fl ash,
3. commissioning.
Applications or Bios can be uploaded through the slave port. The application includes any fi les relating to the parameters in the
buff er memory and any confi guration fi les for acquiring the logs. The download operations allowed are all those featured in pCO
Manager, that is, downloading the logs and the contents of T and P memories.
The slave port connection can also be used to manage the NAND fl ash, with the possibility to upload/download the fi les, delete
fi les or completely format the memory. The same port can also be used for commissioning, as long as a suitable application is used,
together with the information contained in the .2cf fi le.
WARNINGS: The two USB ports cannot be used together. The two ports must be used distinctly to ensure correct operation of the
pCO 5 .
NOTES ON USING PCO MANAGER, BOOT AND BIOS
It is always recommended to use the most recent version of pCO Manager avalilable on http://ksa.carel.com. The BIOS and BOOT
on the pCO 5 are specifi c fi les, diff erent from the pCO
pCO 5 , and, obviously, the BOOT and BIOS fi les for the pCO
+0500040ML - 1.2 - 07.06.2011
Terminal Config
Press ENTER
to continue
P12:Adr
Trm1 02
Trm2 03
Trm3 None
5
to the removable peripheral: application, parameters in buff er memory, logs, Bios.
5
,
5
,
1/2/3/XS BIOS and BOOT fi les. As a result, these fi les cannot be loaded on the
5
Priv/Shared
Sh
Pr
--OK?NO
5
: application, parameters in buff er memory, confi guration fi les
5
Bios is limited solely to USB management.
cannot be loaded on pCO 1/2/3/XS
19
5 board with address 12, while the
.
ENG