Konig Computer CMP-UPS500C Anleitung Seite 2

Presentation
LCD INDICATOR
1. OUTPUT VOLTAGE
2. NORMAL
3. OVERLOAD
4. BATTERY
5. BATTERY CAPACITY
6. POWER SWITCH
7. CHARGE AREA
8. CHARGE INDICATOR
9. OUTPUT SOCKET
10. INPUT PHONE JACK
11. OUTPUT PHONE JACK
12. RESET CIRCUIT BREAKER
13. RS232 PORT
14. INPUT POWER CORD
AA/AAA/9V Battery Charge:
CHARGE
TIME
(HOURS)
USB Charge:
OUTPUT VOLTAGE
OUTPUT CURRENT
CHARGE TIME
STATUS
Shows the output voltage
Utility power in normal condition.
UPS overload. The buzzer emits continuous alarm for 30
seconds.
UPS transfer to backup or battery test mode.
The buzzer emits alarm every four seconds.
Battery capacity indicator
Power on-off/*Battery test and buzzer on-off
7a: AA/AAA Battery Charge; 7b: 9V Battery Charge; 7c:
USB Charge
AA/AAA Battery charge indicator (4x GREEN); 9V Battery
charge indicator (1x YELLOW); USB Charge (1x RED)
Connect with load equipment.
Insert the phone line into the jack.
Connect to the Tel/Fax/Modem by another phone line.
Reset circuit breaker power
A connector to monitor the running status of the UPS
(optional).
Connect to the AC power
CHARGE INPUT
CHARGE OUTPUT
1
AA
AAA
9V
5.0+/-0.2 V
≥300 mA
Different type battery charge time differ
220 VAC/50 Hz
1.4 VDC/100 mA (AA)
1.4 VDC/100 mA (AAA)
9.0 VDC/25 mA (9V)
9H/600 mA
12H/800 mA
9H/180 mA