Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AW H22-H42
Fitting of the wall bracket.
1. Remove the eight screws indicated by the arrows in photo 1.
2. Install the brackets with the holes toward the fan motor, as shown in photo 2.
Photo 1
3. The fan heater may be mounted with the connection pipes facing left or right, as seen from the front, as shown in
photo 3 and 4.
In rooms with high ceilings, the fan heater should be installed in a low position, but not so low that it intrudes
on the working space. For a fan heater wall bracket hole drilling template with the min. distances from the wall or
ceiling, see appendix B.
Make sure that the wall is able to support the weight of the fan heater.
Photo 5
4. The fan heaters are delivered with the air deflector fitted for mounting as in photo 3.
If the fan heater is mounted with the pipes facing right, the air deflector must be turned for the air
to be deflected downward. Remove the six screws (1/4" hex head) attaching the air deflector as shown in photo 5,
lift out the air deflector and turn it 180°. Then reattach it.
Photo 7
Photo 2
Photo 6
7
Werbung
Inhaltsverzeichnis
