Securing Child - Nuna pipa Bedienungsanleitung

3 Pull the vehicle shoulder belt to fasten the infant car seat tightly
and securely.
4 Level line on carrier must be level to the ground when the car
seat is installed.
Tension the vehicle safety belt as much as possible,
checking that it is not loose or twisted.
After installing the infant car seat, always check that the
vehicle belts are routed correctly and securely fastened
into the vehicle buckle.

Securing child

Foam inside infant insert is present to ensure that harness fits child
properly. Infant insert must be used for children 0-6 months.
After the child is placed into the seat, check whether the Shoulder
Harness Straps are at proper height.
1 While pressing the adjustment button located at the front of
the infant car seat, pull completely the two Shoulder Harness
Straps of the infant car seat.
2 Unlock the buckle of the harnesses by pressing the red button.
(23)
3 Place the child into the infant car seat and lock the buckle.
(24)
Please refer to.
4 Tighten the shoulder harness straps by pulling the adjustment
(26)
webbing.
Make sure the space between the child and the Shoulder
Harness Straps is about the thickness of one hand.
1 Unzip the zipper behind the front canopy bow.
2 Pull the canopy out of the compartment.
3 Attach the magnets on each corner to the front of the car seat.
(29)
(20)
(34)
(21)
(22)
(25)
(27)
(28)
20