Mx Onda MX-PIP2195 Benutzerhandbuch Seite 44

2. Using the rotary control 6 to choose the desired temperature. Turn this
control in the sense of clockwise to increase the temperature and
counterclockwise to clockwise to lower the temperature. The display 5
shows the selected temperature.
3. At any time during cooking you can increase or decrease the temperature,
changing the power mode or set the timer.
TIMER
The timer allows you to set a time for automatic shutdown, this time can vary
from 1 minute to 3 hours. For the timer setting you must first select an
operating mode (power or temperature) and a power level or temperature
respectively.
For the timer setting, follow these steps:
1. With the plate turn on and a container in the cooking area, select an
operating mode and a power level or temperature.
2. Press button momentary 2 (
and the timer mode LED indicator will light 7.
3. Using the rotary control 6 to choose the time for automatic shutdown. Turn
this control in the sense of clockwise to increase the time in steps of 10
minutes in the opposite direction to clockwise to decrease the time in steps
of 1 minute. The first digit on the left corresponds to the hours and right
after the two digits corresponding to the minutes.
4. Once the display 5 the time selected alternately display the power or
selected temperature and the remaining time for automatic shutdown. The
timer mode LED 7 remain light to alert you that the timer is activated.
5. At any time during cooking you can increase or decrease the power or the
temperature by turning the rotary control 6.
6. To cancel the timer momentary press button 2 (
the indication " 0:00 ". Wait 5 seconds without touching a button and the
timer is deactivated, the timer mode LED 7 indicator will turn off.
Note:
If activating the timer (display " 0:00 " flashing) within 5 seconds to select the
time for shutdown, timer mode is automatically deactivated.
), the display will flash the indication "0:00 "
9
) and the display flashes