Door Reversibility - AEG S51540TSW1 Benutzerinformation

32 www.aeg.com

9.4 Door reversibility

To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the oper-
ations.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power
socket.
• Tilt back the appliance carefully so
that the compressor cannot touch the
floor.
• Unscrew the left foot.
• Unscrew the screws of the door bot-
tom hinge. Remove the hinge. Put
over the pin in the direction of the ar-
row.
• Unscrew and install the screw on the
opposite side.
• Install the hinge on the opposite side.
• Screw the right foot.
• Unscrew both screws on the rear side.
• Push back the top and lift it from the
fixing elements.
• Unscrew the screws of the door top
hinge.
• Remove the hinge. Put over the pin in
the direction of the arrow. Install the
hinge on the opposite side.
• Tighten the hinge.
• Put the top in position.
• Pull it forward.
• Screw both screws on the rear side.