Menu Settings; Menu Navigation; Changing Settings; Calibration - OHAUS Pioneer PX Series Bedienungsanleitung

EN-24

5. MENU SETTINGS

5.1 Menu Navigation

Calibration

Setup
Internal Cal Language
InCal Adjust Filter Level
Span Cal AZT
Linearity Cal Auto Tare
Graduations
Date format
Date
Time Format
Time
Brightness
Auto Dim
Capacity Bar
Approved
Mode
Note: PX balances are classified into InCal models and ExCal models.

5.1.1 Changing Settings

To change a menu setting, navigate to that setting using the following steps:
Enter the Menu
Long press the Menu button to enter the Menu.
Select the Sub-Menu
Press No to step between the sub-menus, and press Yes to enter the sub-menu.
Select the Menu Item
Press No to step through the Menu Items, and press Yes to enter the displayed Menu Item.
5.2 Calibration
PX balances offer a choice of three calibration methods: Internal Calibration (for InCal models only), Span
calibration and Linearity Calibration.
Attention: Do not disturb the balance during any calibration.

5.2.1 Calibration Sub-menu (InCal models)

Note: ExCal models only have Span Calibration and Linearity Calibration.
TABLE 5-1. USER MENU STRUCTURE
Units RS232
Gram Baud Rate
Kilogram Transmission
Milligram Handshake
Carat
Newton
Pound
Ounce
Ounce Troy
Grain
Pennyweight
Momme
Mesghal
Hong Kong
Tael
Singapore Tael
Tanwan Tael
Tical
Tola
Print GLP
Stable Only Header 1
Numeric Only Header 2
Single Header Header 3
Print To Header 4
Auto Print Header 5
Balance
Header
Name
Date and User
Time Name
Project
Balance ID
Name
Balance
Name
User Name
Project Name
Application
Name
Result
Gross
Net
Tare
Line Feed
PX Series Balance
Factory
Lockout
Reset
Reset All Calibration
Setup
Units
RS232
Print
GLP
Factory
Reset