Drilling depth
Chucking capacity
Motor data
APPlICAtIons
The benchtop drilling machine RB 13
is designed for drilling through metal,
plastic, wood and similar materials.The
machine must not be used to process
foodstuffs or health-endangering mate-
rials.The drill chuck is designed only for
use of drills and tools with a cylindrical
shaft diameter of 1 to 13 mm. The ma-
chine is intended to be used by adults.
The machine may only be used
for the type of work specified,
and in conjunction with the mate-
rials cited. ROTWERK can accept
no liability for loss or damage
arising from any other unauthor-
ised use. Furthermore, such un-
authorised use would also void
any warranty claim.
GEnERAl sAFEty InFoRMAtIon
•
This device is not suitable for use
by persons (including children) with
restricted physical, sensory or men-
tal abilities, or without experience
in and/or knowledge of the device;
unless they are supervised by, or re-
ceive training in the operation of the
device from, an individual who is re-
sponsible for their safety.
•
Children must be supervised to en-
sure that they do not play with the
device.
•
Never allow the device to be used by
children or other persons who are not
familiar with the operating instruc-
tions. The minimum age for the oper-
ator of the device may be determined
by local regulations.
When using power tools, the fol-
lowing fundamental safety pre-
cautions must be taken in order
to protect against electric shock
and the risk of injury or fire:
PREPARAtIon
•
Be aware of other people!
Never use the device if there are per-
sons or animals in the vicinity of the
device.
•
wear safety goggles and ear protec
tion!
Protect your eyes against flying parts
and chips. Wear ear protection and
safety goggles at all times during op-
eration.
•
wear suitable work clothing!
Always wear safety gloves when
working with sharp-edged workpiec-
es.
Wear tight-fitting clothing. Do not
wear loose-fitting clothing or clothing
with belts or cords that hang down.
They could become caught in rotat-
GB
DE
17