Transportation And Placement; Operation - Klarstein 10030243 Gebrauchsanleitung

Transportation
• Do not put the fridge up-down or across, press, and shake, when move it, please don't let the angle more
than 45° When move please don't put your hand on the door, the top part and any other pumps.
Placement
• Please put it where the aeration is well.
• On refrigerator top, the space should not less than 30cm, both sides and back should be more than 10cm
far from wall. Door could open more than 120°
• Far from the heat, and keep it from the sunshine.
• Don't put it in the humidity or near the water, in order not to rust or lessen isolation.
• The place should be flat and strong.
• The wire shouldn't be covered by the refrigerator or other things. It could keep the accidents away
Preparations for use
Unpack all the package, including the base foam and all the adhesive tape to firm.
Count all the spare parts and materials with the refrigerator.
Put the refrigerator at the right place.
Clean it before using
Power on and use
Take off all the packages.
Power on; turn the Thermostat button between "1" and "5". It starts to work.
Close the door for several minutes, then touch the right and left side of the refrigerator you'll feel warmness.
After 30 minutes, the refrigerator is obviously cold. It means the compressor system is good. Later please use
the Thermostat to control the temperature.
Thermostat
The temperature in the refrigerator is controlled by the Thermostat.
Position of Function
the dial
0 Off.
1-5 Refrigeration:
The set temperature has an effect on the running time of the compressor.

Transportation and Placement

Operation

14