Intended Use - Facom E.2015 Original Bedienungsanleitung

EN
READ THIS MANUAL BEFORE OPERATING THE MACHINE.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE INFORMATION IN THIS MANUAL
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
SAFETY WARNINGS
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.
• Keep children and bystanders away while operating
a power tool.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
• Keep cutting tools sharp and clean.
• DO NOT use in a damp atmosphere, where
flammable gases may be present or near
combustible materials.
• DO NOT apply to the same place for a long time.
• Place the appliance on its stand after use and allow
it to cool down before storage.
• DO NOT place your hand over the air vents or
block the vents in any way.
• ALWAYS switch the tool off before putting it down.
• This appliance is not intended for use by persons
(including children) with reduced physical,
Do not use damaged, frayed or
deteriorated air hoses and fi ttings.
Do not expose power tools to rain or wet
conditions.
Do not carry the machine by the hose.
Keep body stance balanced and firm.
Do not overreach when operating this
machine.
Do not use the machine under the
infl uence of drugs, alcohol, medication or
if you are tired.

INTENDED USE

Your heat gun has been designed for stripping paint, soldering pipes, shrinking PVC, welding and bending
plastics as well as general drying and thawing purposes.
NU-E.2015_0216.indd 6
WARNING
IMPORTANT SAFETY INFORMATION ENCLOSED.
INTO THE HANDS OF THE OPERATOR.
WARNING
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
• DO NOT obstruct either the air intake or nozzle
outlet, as this may cause excessive heat build up
resulting in damage to the tool.
• DO NOT poke anything down the nozzle as it could
give you an electric shock.
• DO NOT allow paint to adhere to the nozzle or
scraper as it could ignite after some time.
• DO NOT use in paint spray booths or within 3.0 m
of paint spraying operations.
• DO NOT use this tool to remove paint containing
lead.
NOTE: These heat guns are capable of producing
temperatures in excess of 550° C.
• DO NOT use this tool to heat food.
• Be sure to direct the hot air blast in a safe direction;
away from other people or flammable objects.
• DO NOT use the heat gun in combination with
chemical strippers.
• DO NOT direct heatgun airflow directly on glass.
• Clean the scraper blade often during use. Built up
residue on the blade is highly flammable.
Use protective equipment such as
glasses, gloves, safety shoes as well as
acoustic protection.
Remain vigilant, use common sense and
pay attention when using the machine.
DO NOT touch the metal nozzle as
it becomes very hot during use and
remains hot for up to 30 minutes after
use.
DO NOT use as a hair dryer.
2/19/2016 3:07:28 PM