Package Contents - DeWalt D51855 Bedienungsanleitung

extra cushion, take frequent rest periods,
and limit daily time of use.
Markings on Tool
The following pictograms are shown on the tool:
Pneumatic tool with safety yoke.
Do not use on scaffoldings and ladders.
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Nail angle.
Maximum number of nails in canister.
Nail diameter.
Nail length.
Max. operating pressure.
DATE CODE POSITION (FIG. 1)
Date Code (u), which also includes the year of
manufacture, is printed into the housing surface
above the trigger switch.
Example:
2010 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Nailer
1 Sequential action trigger
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger/lock-off switch
b. Rafter hook
c. Canister
d. Canister latch
e. Nail guide door
f. Contact trip
g. Depth setting wheel
h. Wear guards
i. Exhaust cap
INTENDED USE
The D51855 coil framing nailer has been designed
for driving fasteners into wooden workpieces.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These nailers are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING: Prior to assembly and
adjustment, ALWAYS lock-off trigger,
disconnect air line from tool and remove
fasteners from the canister before
making and adjustments or personal
injury may result.
Trigger
WARNING: Keep fingers AWAY from
trigger when not driving fasteners to
avoid accidental firing. Never carry tool
with finger on trigger. In Contact Bump
Actuation Mode tool will fire a fastener
if safety is bumped while trigger is
depressed.
These tools are assembled with a bump action
trigger. A sequential action trigger is also included
with the original packaging. For definitions of "bump
action" and "sequential action", see below.
The gray trigger with imprinted on the side is
the single sequential action trigger and causes the
tool to operate in this mode.
EN GL IS H
25