Getting To Know The Appliance - Bosch KTR Serie Montage- Und Gebrauchsanleitung

9. Unscrew the feet (6).
10. Unscrew the 3 screws (7).
11. Remove the bottom hinge (8).
12. Unscrew the nut (9) and pull out the bolt (10).
13. Insert the bolt (10) into the left boring and apply the
nut (9) and tighten.
14. Apply the bottom hinge (8) and apply 3 the
screws (7) and tighten.
15. Screw the feet (6) into the bottom hinge (8).
16. Attach the appliance door to the bottom hinge (8).
17. Apply the 2 screws (4) and tighten.
18. Apply the top hinge (5) and apply the 2 screws (3)
and tighten.
19. Turn the appliance upright again.
20. Mount the cover panel (2) at the front and lay it flat
on the rear.
21. Apply the 2 screws (1) and tighten.
22. Open the appliance doors and attach all fittings
(see section headed Fittings).

Getting to know the appliance

Appliance
The features of the models may vary.
The illustrations may differ from your particular model.
1 Light switch
2 Glass shelves
3 Temperature controller and LED light
4 Cover for crisper drawer
5 Crisper drawer
6 Door pockets
7 Egg tray
8 Door pocket for bottles
en
21