Beurer Tria Precision Reinigungsanleitung Seite 14

TO CHARGE:
1. Plug the battery charger into the Tria Laser
Precision charger socket and into a power
outlet.
2. The indicator lights will flash one after another
while the Tria Laser Precision is charging.
3.
Once fully charged, indicator lights will stop
flashing and stay green and you may unplug
the charger. The Tria Laser Precision can
remain plugged in for extended periods of
time without damage.
NOTE: To prevent damage to your Tria Laser
Precision, use only the included Tria battery
charger. If you lose the charger, please
contact Customer Service.
11
NOTE: You may charge the laser in Quiet
mode (charges without the sound of cooling
fan), but it will take longer. To change charging
modes, press the power button while charging.
TEST THE LASER ON A PATCH OF SKIN
Before your first full treatment on a new
area of your body, we recommend you test
the Tria Laser Precision on a patch of skin
there and try different treatment levels,
starting at Low.
1. Prepare your skin and unlock the Tria Laser
Precision (see pages 12-13). The Tria Laser
Precision will be set to Low.
2.
Place the treatment window flat against
your skin, and test one laser pulse.
3. If Low was tolerable for you, then move to
another test area and increase to Medium,
testing a patch at that level with one laser pulse.
To adjust the Tria Laser Precision setting up or
down, press the power button (see page 13).
4.
If Medium was tolerable for you, change test
locations and increase to High, testing a patch
at that level with one laser pulse.