Korg K25 Bedienungsanleitung Seite 9

4
Set the power switch to the DC position. The power LED will light. When the power
is turned on, the most recently saved settings will be recalled automatically.
5
Turn on any external MIDI sound modules connected to your K-Series controller.
PEDAL jack
Pedal switch
6
When you are ready to turn off the power, turn off any external MIDI sound mod-
ules first, and then set the K-Series power switch to STANDBY.
Using the internal sound engine [K61P only]
1
Connect the plug of the optional AC adapter to the K-Series power connector, and
plug the adapter into an AC outlet.
2
Using standard instrument cables with 1/4" plugs, connect the output jacks on the
K61P to the inputs of your audio monitor system or audio recorder. When connect-
ing only one output, use the L/MONO jack only.
Use the volume knob to adjust the level of the OUTPUT jacks.
3
Set the power switch to the DC position. The power LED will light.
4
Turn on your connected audio monitoring system.
Amplified speakers
INPUT
MIDI OUT Power supply connector
MIDI cable
MIDI IN
External MIDI sound module
OUTPUT jack HEADPHONES jack
Owner's Manual
Power switch position
Plug the AC
adaptor into
an AC outlet
Headphone
9