Getting Started; Using The Clearreader For The First Time; Opening The Camera Arm; Positioning A Document - Optelec ClearReader+ Bedienungsanleitung

Optelec

3. Getting Started

Using the ClearReader
When you use the Optelec ClearReader
needs to be charged. To charge the battery connect the ClearReader
a mains power outlet using the ClearReader
Charging takes approximately 3 hours.

Opening the camera arm

To open the camera, locate the "push" sign on the camera arm at the
front of the ClearReader
camera arm until you hear a click. The arm will eject and move towards
you. Close the camera arm in the same way by pushing the end of the
arm back to the closed position until you hear a click.

Positioning a document

The Optelec ClearReader
letter-size page measured from the front side of the ClearReader
position the document, place it in front of the ClearReader
two document positioning indicators with the top edge of the document
aligned towards the front of the unit. The orientation of the document will
not influence the recognition of the text.
English
+
for the first time
+
for the first time, the battery
+
between the speakers. Gently push on the
+
camera can capture an area of an A4 or
+
power supply included.
+
between the
ClearReader
+
to
+
. To
+
Page 12