English; Getting Started - Electrolux E7CB1 Serie Bedienungsanleitung

ENGLISH

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux
accessories and spare parts. They have been designed especially for your product. This product is designed with
the environment in mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Blender base
B. Suction feet
C. ON/OFF-button
D. Mini jug
E. Blender blade
F. Blender blade base
G. Mini jug lid with filler hole
H. Measuring cup
I. Take away bottle*
J. Spill-proof drinking lid with carry handle*
Picture page 2-4

GETTING STARTED

1
Before using your appliance for the first time: Remove all packing material such as plastics, stickers or tags that
may be attached to the blender base, bowls or attachments.
Clean the appliance and accessories, see instructions: "Cleaning and Care".
2
Prepare the ingredients: Rinse ingredients thoroughly. Cut the ingredients into 4 to 6 pieces and remove any
hard or large seeds. Remove any thick peel from the fruit or vegetables.
3
Place the Blender blade (E) on the top of the Blender blade base (F), and tighten the Mini jug (D) until it firmly
locks into position. Place the assembled jug on the Blender base (A) and rotate it clockwise until it locks into
position. (The jug can only be placed in one position). When locked, the symbol
with the symbol
indicated on the jug.)
Caution! Always place the sealing ring around the Blender blade. Use only sealing rings provided by Electrolux!
4
Close the lid by aligning the lever on the lid with the handle of the jug. Insert the measuring cup.
(You can add ingredients through the filler hole. Never remove the measuring cup or the lid while running the
product.)
Caution! Never run the blender empty. When processing hot liquids, see step 5.
5
Processing hot liquids: We recommend to allow hot liquids to cool down (max 90 °C) before filling the jug.
Fill the jug only half full and start processing on low speed. The blender jug can become very warm – take care
to protect your hands and to ventilate steam out through the filler hole. Always replace the lid before use.
6
Start the blender: Plug into mains. Press the ON/OFF-button (C), the buttons will light up. Press the 1 (Low) or 2
(High) button, to select your desired processing speed.
7
Caution! Keep hands and utensils out of the blending jug while blending.
Caution! Never run the blender empty, running the blender empty can cause overheating and damage the
product.
8
You have preset speeds (1, 2), dedicated recipe programs, and Pulse mode to choose from. The selected
speed or recipe program will light up. The blender will operate until the program is finished. To stop any program
manually, press any button.
9
With Pulse you can give the ingredients a quick mix to get to your desired consistency. Press the Pulse button
(Q) to go into Pulse mode. The Pulse and the speed buttons start blinking. Press 1 (Low) or 2 (high) to pulse at
different speeds.
10
The product comes with a variety of recipe programs. You can choose between Ice crush (O) and Smoothies (P).
The blender will stop automatically when the program is ready.
6
on the blender base. Put the ingredients in the jug. (Do not exceed the maximum level as
K. Cooling stick*
L. Multi-chopper jar*
M. Multi-chopper blade*
N. Multi-chopper blade base*
O. Ice Crush function
P. Smoothie function
Q. Pulse function
*Certain models only
on the jar should be aligned
www.electrolux.com