Siko MSK400/1 Originalmontageanleitung Seite 19

MSK400/1
Installation
Fig. 1: Mounting of the magnetic tape
Mounting examples
The simple mounting procedure by means of a beveled magnetic tape as
shown in
ments. In a non-protected environment there is the danger of peeling off.
Mounting approaches as shown in
such cases.
Optimum protection is provided by mounting in a groove as shown in
5. The groove should be deep enough so that the complete magnetic tape
will be embedded in it.
Fig. 2: Magnetic tape
beveled
Fig. 4: Magnetic tape screwed
from top
MSK400/1 · Date 07.02.2018 · Art. No. 81145 · Mod. status 44/18



Fig. 2
can only be recommended for very protected environ-



Fig. 3 Fig. 4
and are more suitable in
Fig. 3: Magnetic tape screwed
on the front
Fig. 5: Magnetic tape in groove
English 19
Fig.