Designated Use; Responsibilities Of The User; Personal Protective Equipment (Ppe) - Abicor Binzel MIG/MAG ROBO Betriebsanleitung

2 Safety

2.1 Designated use

• The device described in these instructions may be used only for the purpose and in the
manner described in these instructions. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are not permitted.

2.2 Responsibilities of the user

• Keep the operating instructions within easy reach at the device for reference and enclose
the operating instructions when handing over the product.
• Putting into operation, operating and maintenance work may only be carried out by
qualified personnel. Qualified personnel are persons who, based on their special training,
knowledge, experience and due to their knowledge of the relevant standards, are able to
assess the tasks assigned to them and identify possible dangers
(in Germany see TRBS 1203).
• Keep other persons out of the work area.
• Please observe the accident prevention regulations of the country in question.
• Ensure good lighting of the work area and keep the work area clean.
• Occupational health and safety regulations of the country in question. For example,
Germany: Occupational Health and Safety Act and Ordinance on Industrial Safety and
Health
• Regulations on occupational safety and accident prevention

2.3 Personal protective equipment (PPE)

To avoid danger to the user, these instructions recommend the use of personal protective
equipment (PPE).
• It consists of protective clothing, safety goggles, a class P3 respiratory mask, protective
gloves and safety shoes.
2.4 Classification of the warnings
The warnings used in the operating instructions are divided into four different levels and are
shown prior to potentially dangerous work steps. Arranged in descending order of importance,
they have the following meaning:
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely
critical injuries.
EN - 4
MIG/MAG ROBO welding torch