Micropelt MVA005 Bedienungsanleitung Und Datenblatt Seite 21

MVA005
Bedienungsanleitung und Datenblatt
27 1 DB0.4
28 1 DB0.3
29 1 DB0.2
30 1 DB0.1
31 1 DB0.0
Vom Raumregler zum Stellantrieb: (DIRECTION-2 RECEIVE DATA - FROM RCU TO ACT)
Offset Size Bit-
range
DB3.7...
0 8
DB3.0
DB2.7...
8 8
DB2.0
16 1 DB1.7
DB1.6...
17 3
DB1.4
20 1 DB1.3
21 1 DB1.2
2018
Window open
DWO
detection
LRN Bit LRNB
Radio Com
RCE
Error
Radio Signal
RSS
Strength
Actuator
ACO
obstructed
Data Short-
Cut
Valve position
or
SP
Temperature
Set point
Temperature
TMP
from RCU
Reference
Run REF
(Maintenance)
RF
Communicatio RFC
n interval
Summer Bit SB
Set Point
SPS
Selection
Seite 20 von 34
0: No open window detected
Window open
1: Open window detected
detection
0: Teach-in telegram
Telegram type
1: Data telegram
0: Radio communication is stable
Indicates radio
1: Six or more consecutive radio
communication
communication errors have
errors
occurred
0: Radio signal is strong
Weak radio signal
1: Radio signal is weak
warning
(-77 dBm or less)
Reports blocked 0: Actuator working correctly
actuator (motor) 1: Actuator is blocked
Reference run not
successfully
completed
Description Valid
Range
0..100dec
Valve Position
or
101...255 (0x65...0xFF)
Temperature Set
reserved
point
Or
0...80dec
Selection with
DB1.2
81...255 (0x51...0xFF) reserved
0..160dec
Room temperature
161...254 (0xA1...0xFE)
from room control
reserved
unit (RCU)
Special values 0 and 0xFF:
IF SPS=1, use actuator-internal
temperature sensor.
0: Normal operation
Execute reference-
1: Reference-run and
run
Maintenance Interval
0b000: AUTO (default)
2, 5 or 10 minutes
Radio duty cycle
0b001: 2 minutes
selection.
0b010: 5 minutes
Find additional
0b011: 10 minutes
information in the
0b100: 20 minutes
Appendix
0b101: 30 minutes
0b110: 60 minutes
0b111: 120 minutes
Initiate summer 0: Normal operation
mode (reduced 1: Summer mode with
communication)
0: Valve position mode
Set point selection 1: Temperature set point
for DB3
Scale Unit
0...100 %
0...+40 ºC
0...+40 °C
8h radio duty cycle
(0...100%)
(0...40°C), actuator-
internal temperature
controller is used
MVA005_1DB_1018v3d