Principal Of Operation; Applications; Precautions - Mityvac MV6410 Benutzerhandbuch

PRINCIPAL OF OPERATION

This equipment is designed and intended for use as a
means to dispense fluid . It utilizes a manual pressure
pump to build pressure in the reservoir . The pressure
forces fluid to dispense out of the reservoir through a
fluid pickup tube . The output of the fluid pickup tube
is connected to a quick-change coupler, to which a va-
riety of accessories can be attached to control or direct
the flow of fluid according to the intended application .
The equipment should never be operated above a
safe level of pressure depending on the application . A
gauge is installed to indicate the pressure in the reser-
voir, and should be observed regularly to ensure the
pressure remains at or below what is recommended
for the application .

Applications

This equipment is intended for filling reservoirs with
fluids such as engine coolant, motor oil, or wiper,
automatic transmission, brake or power steering fluid .
However, with the proper accessories it can safely
be used to pressure bleed hydraulic brake or clutch
systems, or refill or top-off sealed automatic transmis-
sions .

Precautions

This equipment is designed for servicing a variety
of vehicles in a safe, convenient manner . However,
differences in vehicle makes and models may make it
impossible to use this equipment as it is intended . Do
not attempt to force the use of this equipment on an
application for which it is not designed to perform .
The procedures documented in this manual are to
serve as guidelines for the use of this equipment . In
addition to these guidelines, always follow the manu-
facturer's recommended procedures when servicing
each unique vehicle .
The use of this equipment is simple and straightfor-
ward if you follow the instructions . However, always
keep in mind that you are working with a system that
may be under pressure, with fluid that is just waiting
to be expelled . When operating this equipment,
use common sense, and always stop to think before
disconnecting a hose or other component .
Page Number - 4
• This equipment is intended only for professional use
by personnel trained in performing the service func-
tions for which it is has been designed .
• Read carefully and understand all instructions prior
to using this equipment .
• Always wear eye protection and proper clothing
when operating this equipment
• Do not attempt to modify the pressure relief valve
to alter its performance . If pressure in the reservoir
ever exceeds 23 psi (1 . 6 bar), return it to an autho-
rized service center for repair or replacement .
• Some fluids, including brake fluid, are corrosive,
and proper care should be taken to protect painted
surfaces and skin from exposure .
• Do not use this equipment with gasoline or other
flammable liquids, or with fluids at temperatures
above 175° Fahrenheit (80° Celsius) .
• Consult and follow the vehicle manufacturer's rec-
ommended procedure when using this equipment
to perform automotive service .
Form 801193