Operation; Error Messages; Technical Data; Warranty - ADE Alba Bedienungsanleitung

Thank you for deciding to purchase this high-quality product from the WAAGEN-
SCHMITT Company. You have purchased a set of scales of the highest technical
standard and proven quality.
Please read through this operating manual carefully before starting-up the scales for the
first time, and keep it in a safe place so that this information is available to you when you
need it.
1. Start-up
Inserting the battery: Open the battery compartment cover on the underside of the
scales and insert the provided batteries (3 x 1.5V AAA). Please be mindful of the correct
polarity of the batteries (+/-).
Safety information:
Please take care not to let any objects fall onto the scales,
otherwise the scales could be damaged.
Only clean the scales with a damp cloth. Do not use any solvents
or abrasive cleaning products. Do not immerse in water. All
plastic parts of the scales should be cleaned immediately after
contact with fat, spices, vinegar and other strongly seasoned and
coloured foodstuffs. Avoid contact with citric acid.

2. Operation

Activating the sca les: Place the scales on an even and firm surface. The scales make
use of highly sensitive sensor buttons (Sensor Touch). To activate the scales, press the
ON/OFF button to the right of the display. The backlight will turn on and "18:8.8.8.8g"
will initially appear on the display. After the scales have stabilised, either "0 g" or "0.00
oz" (depending on the settings) will appear on the display. The scales are now ready for
weighing, and you can read off the weight either from the analogue or from the digital
display. Please note: If a weight-value is shown after activation, touch the TARE button
to set the scales to zero.
Units of weight: By pressing the g/oz button on the underside of the scales, you can
change the country-specific unit of weight (g = grams / oz = ounces). Please make sure
that the scales are set to the weight-unit relevant to you.
Zeroing (tare) function: By touching the TARE button you can set the scales to "0 g".
Place, for example, a bowl on the weighing platform, press the TARE button and thus set
the scales to "0 g" again. This process can be repeated as often as you like until the total
capacity of the scales (5 kg) is reached. After removing the weighed item the total weight
will be displayed as a negative value (Indicator: Minus symbol –).
2
Automatic deactivation of scales: If the displayed weight does not change within approx.
30 seconds, the scales automatically deactivate. In order to conserve battery life, you can
also deactivate the scales manually after use by pressing the ON/OFF button.

2. Error messages

"Lo" = Display battery empty – please replace the batteries with the battery type
intended for your scales (3 x 1.5V AAA).
"------" = Overload indicator – max. capacity of scales (5 kg) has been exceeded.
Remove the load from the scales immediately; otherwise the load cell
could incur damage.

3. Technical Data

Weight-bearing capacity x division: Max. 5 kg x 1 g
Dimensions: 146 mm x 254 mm x 23 mm
Batteries: 3 x 1.5V AAA (contained in product package)
We reserve the right to make technical modifications in the course of further development.

4. Warranty

WAAGEN-SCHMITT guarantees the free correction of defects resulting from material or
manufacturing faults through repair or exchange 3 years from the purchase date. Please
get your warranty section filled out and stamped by the retailer when you make your
purchase. In case of warranty, return the scales to your retailer along with the warranty
section indicating the reason for your complaint.
Plea se note: Under extreme electromagnetic influences e.g. when operating a radio
device in immediate proximity to the scales, the indicator value may be affected. After the
disturbing influence has stopped, the product may once again be used as intended,
although a re-activation may be necessary.
Le gal duty to inform about battery disposal: Batteries do not belong in household
waste. As a consumer you are legally obligated to return batteries. You can hand in your
old batteries at the public collection point in your community or anywhere where batteries
of the same kind are sold.
Plea se note:
These symbols can be found on batteries:
Li = Battery contains lithium
Al = Battery contains alkali
Mn = Battery contains manganese
CR2032 (Li); AA (Al, Mn); AAA (Al, Mn)
3