Setting The Video Convert Mode; The Video Conversion Function - Denon AVC-A1XV Bedienungsanleitung

ENGLISH
System Setup
SURROUND PARAMETER
SYSTEM SETUP
ENTER D H F G
ENTER
SYSTEM SETUP
SURROUND
PARAMETER
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Setting the Video Convert Mode

Set whether or not to use the video conversion function.
1
D D H H
Press
Setup Menu", then press
2
D D H H
Press
ENTER
press
3
D D H H
Press to select the input source, then press
to set.
<STATUS>
ON, OFF:
Select "ON" to use the video conversion function, "OFF" if you do
not want to use it.
4
ENTER
Press
2
D H F G
[ON SCREEN]
• Down-converting from the component video signal to the S-Video
and composite video signal is possible only when the resolution of a
component video signal is 480i / 576i.
• When a non-standard video signal from a game machine or some
other source is input, the video conversion function might not
operate. If this happens, please set the "Video Convert Mode" to
"OFF".
• When the video conversion function has been used, information
such as that of text broadcasts which has been added to the video
signal might not be output. If this happens, please set the "Video
Convert Mode" to "OFF".
to select "Video Setup" at the "System
ENTER
.
to select "Video Convert Mode", then
.
F F G G
.
3
3
ENGLISH

The video conversion function

The AVC-A1XV is equipped with a function for up and down
converting video signals.
Because of this, the AVC-A1XV's MONITOR OUT terminal can be
connected to the monitor (TV) with a set of cables offering a higher
quality connection, regardless of how the player and the AVC-A1XV's
video input terminals are connected.
Generally speaking, analog video connections using the component
video terminals offer the highest quality playback, followed by
connections using the S-Video terminals, then connections using the
regular video terminals (yellow).
The flow of the video signals.
(HDMI / DVI-D
terminals)
(Component video
terminals)
(S-Video terminal)
(Video terminal)
This unit's input terminals This unit's output terminals
: only MAIN ZONE 480i/576i
¢ Cautions on the ZONE2 video conversion
function
There is no TBC (Time Base Collector) for ZONE2.
When the component video terminals are used to connect the AVC-
A1XV with a TV (or monitor, projector, etc.) and the video (yellow) or
S-Video terminals are used to connect the AVC-A1XV with a VCR,
depending on the combination of the TV and VCR the picture may
flicker in the horizontal direction, be distorted, be out of sync or not
display at all when playing video tapes.
If this happens, connect a commercially available video stabilizer, etc.,
with a TBC (time base corrector) function between the AVC-A1XV and
the VCR, or if your VCR has a TBC function, turn it on.
System Setup
(HDMI / DVI-D
terminals)
(Component video
terminals)
(MONITOR OUT ZONE2)
(S-Video terminal)
(MONITOR OUT ZONE2)
(Video terminal)
(MONITOR OUT ZONE2)