Switching On And Off; Indicator Light; Working Advice; Maintenance And Cleaning - Parkside PBH 1500 D4 Originalbetriebsanleitung

- low rotation speed (setting 1 or 2) for
tasks requiring careful and precise drilling
- medium rotational speed (setting 3 or 4)
for drilling in steel or wood
- high rotational speed (setting 5 or 6) for
hammer drilling/chiselling in concrete or
stone

Switching on and off

Switching the appliance on:
Press the ON/OFF switch
Switching the appliance off :
Release the ON/OFF switch

Indicator light

The GREEN indicator
the machine is plugged in.
The RED indicator
carbon brushes are worn out. Stop and
send the machine to an after - service
agent.

Working Advice

Before any work on the machine
itself, pull the mains plug.
Vibration Damper
ANTI
VIBRATION
- The integrated vibration damper reduces
occurring vibrations.
- The soft grip handle increases the safety
against slipping off and thus provides for
a better grip and handling of the power
tool.
PBH 1500 D4
.
.
lights up when
4b
lights up when the
4a

Maintenance and Cleaning

WARNING! RISK OF INJURY!
Switch the appliance off and
remove the power plug before
starting any work.
The appliance must always be kept clean,
dry and free from oil or grease.
To clean the casing, use a soft dry cloth.
Clean the tool holder
To do this, pull the locking sleeve
backwards and pull the dust protector
cap off the tool holder
Before inserting the tool, lightly grease
the tool holder
WARNING!
If the supply cord of this power tool is
damaged, it must be replaced by a
specially prepared cord available through
the service organization.
regularly:
.
.
GB
IE
NI
11