File System - Sony BVP-9500WSP Bedienungsanleitung

Overview

File System

The BVP-9500WS/9500WSP can store the adjustment
data in one of the following files.
Reference file
The reference file stores the reference values used for
automatic setup adjustment and the standard settings of
the switches.
Scene files
Scene files store paint data for each scene. For
example, if you store data prepared in rehearsal for a
particular scene in a scene file, the data can be
retrieved to reproduce the same camera settings used in
rehearsal.
Lens files
Lens files store specific data for a lens to be used.
When you use a recommended lens, the standard
values are stored in a lens file at the factory.
OHB files
OHB files store specific data for a CCD unit. The
standard values are stored in an OHB file at the
factory.
Creation, storage and retrieval of files are performed
using an optional MSU-750/700/700A Master Setup
Unit or RCP-700-series Remote Control Panel. The
type and number of files which can be handled depend
on the unit used.
For details, refer to Chapter 5 in the System Manual for the
BVP-900-series video camera system.
4(E)
Differences from the BVP-900-series
OHB files
Data for normal speed and triple speed for a Super
Motion operation are stored in different files. Data
storage operations are necessary for each speed.
For compensation, the appropriate file is automatically
selected according to the speed.
Master setup data
Data for normal speed and triple speed are stored
separately.
An automatic level setup operation is necessary for
each speed.
Control data
Data for black shading and black set are stored
separately for normal speed and triple speed.