Haier HB25FSSAAA Bedienungsanleitung Seite 24

Disassembling and
cleaning the small
freezer drawer
1. Pull out the small freezer
drawer as far as possible,
and take out the ice cube
tray and dumpling tray that
are connected to the small
freezer drawer.
2. Tilt the small freezer drawer
upwards then pull it out.
3. Reverse the above
procedures to put the small
freezer drawer back in.
Wipe the small freezer drawer
with a soft towel or sponge
dipped in warm water (neutral
detergent can be added), and
after cleaning it, put it back it.
Disassembling the
gear connecting rod
1. After removing the small
freezer drawer, push the
gear connecting rod to the
very front. Push aside the
protruding clip fastener that
is on the left end of the gear
connecting rod.
2. Move the metal rod to the
left, then disengage the gear
connection from the right end
of the rod.
3. Pull out the metal rod from
the left gear connecting part.
4. Reverse the above
procedures to install the gear
connecting rod.
Disassembling and
cleaning the pull-out
tray
1. Pull out the large freezer
drawer as far as possible.
2. Tilt the pull-out tray upward
to take it out.
3. After moving the pull-out
drawer, disengage the clip
position, and take out the
tray.
Wipe the pull-out drawer and
the pull-out tray with a soft
towel or sponge dipped in warm
water (neutral detergent can be
added), and after cleaning them,
put them back in.
Disassembling the door unit
For the disassembly of the door unit, please contact a Haier
salesperson if necessary.
Illumination lamps in the refrigerator and
their replacements
Illumination lamp parameters: DC 12 V, 2 W × 2, 18 W × 1
The illumination lamp is an LED lamp, the corresponding lamp
consumes less power and has a long lifespan.
In case of failure, do not disassemble by yourself. Please
contact after-sales staff to replace.
The illumination lamp in the freezer
compartment and its replacement
Illumination lamp parameters: DC 12 V, 1 W × 4
The illumination lamp is an LED lamp, the corresponding lamp
consumes less power and has a long lifespan.
In case of failure, do not disassemble by yourself. Please
contact after-sales staff to replace.
The illumination lamp in MY ZONE and its
replacement
Illumination lamp parameters: DC 12 V, 1 W × 2
The illuminating lamp is of an LED lamp, the corresponding
lamp consumes less power and has a long lifespan.
In case of failure, do not disassemble by yourself. Please
contact after-sales staff to replace.
23
Disassembling and
cleaning the large
freezer drawer
1. Pull out the large freezer
drawer as far as possible,
and take out the pull-out
drawer of the large freezer
drawer.
2. After moving the pull-out tray,
disengage the clip position,
and take out the tray.
3. Tilt the large freezer drawer
upward to take it out.
4. Reverse the above
procedures to install the large
freezer drawer.
Wipe the large freezer drawer
with a soft towel or sponge
dipped in warm water (neutral
detergent can be added), and
after cleaning it, put it back in.