Front Panel; Part Names - Pioneer PD-70AE Bedienungsanleitung

> Before Start > Part Names

Front Panel

Part Names


1. Í/I STANDBY/ON button/indicator: Switch the main power of the unit on and off. When
starting up the unit, the indicator in the center of the button lights blue.
2. STANDBY indicator: Lights red when the unit is in standby mode.
3. Disc tray: Place discs here. 8-cm discs can also be used.
4. < button: Open or close the disc tray.
5. Play buttons:
:6 : Return to the beginning of the track being played. Press again to move to the
track before. Press and hold to rewind the track quickly.
/; : Play or pause play.
1
5 9 : When pressed during play, move to the next track. Press and hold to fast-
forward through the track.
: This button stops playback.
∫
6. Remote control sensor
0 The signal range of the remote controller is within about 23´/7 m, at an angle of 30° to
either side.
4
> Install

  
> Playback


7. CD/SACD button/indicator: Switch between CD/SACD as the source. When playing a
hybrid SACD, the layer being played switches if you press this during play. (
The indicator lights blue when SACD is selected.
8. DIRECT button/indicator: Switch the DIRECT mode ON and OFF. (
The indicator lights blue when the DIRECT mode is ON.
9. Display ( P7)
10.SOURCE button: Switches the source to be played.
11. SETUP button: Displays the SETUP menu. (
 
 
P16)
Advanced Setup | Others
P18)
P15)